Archive for the Terrarium Construction Category

Creating a Terrarium Fogger

Posted in Terrarium Construction with tags , on June 28, 2008 by joshsfrogs

Supplies:

1. Ultrasonic Humidifier. These are the cool mist humidifiers. Other humidifiers heat up water to create mist which will increase the heat in the vivarium or could burn your frogs. Click here for the cheapest Ultrasonic Humidifiers

2. PVC reducer. Needs to be large enough to fill the hole in the humidifier. It should reduce to 1/2 inch. I use a 2 in to 1/2 inch reducer.

3. Plastic tubing. With a 1/2 inch connectors you would use 5/8 tubing.

4. PVC fitting. This will be the access point on the vivarium. With 5/8 tubing you use a 1/2 inch fitting.

5. Timer. Used to set up a misting cycle.

Procedure

Task Tips Pictures
Gather supplies Ebay is a great place to find cheap ultrasonic humidifiers. PVC supplies are cheaper at your hometown hardware store than at home depot or lowes.
Take cap off of Humidifier    
Insert PVC Reducer into Ultrasonic Humidifeir If it doesn’t fit exactly, you can use 100% silicone to make a sure fit.
Attach tubing to the reducer  
Run tubing from Humidifier to the tank You do not want any point of the tubing to lower than the point at which the tubing meets the tank (sagging). Condensation will form in the tube. If there is sagging in the line, the condensation will gather at the lowest spot and block fog from going through the tubing.  
Attach fitting to vivarium Can either be siliconed to the screen or drilled into glass lid or side.
Attach tubing to the fitting  
Set timer 2-3 times a day max. You want to allow things to dry out in between foggings. You only need the fogger on for a couple of minutes. A few minutes is more than enough to fill the whole tank with fog.  

Troubleshooting

Problem Possible Solution(s)
Fog isn’t making it to my tank
  • Make sure there are no leaks at any of the connections. You can use 100% silicone to seal any leaks.
  • Make sure there are no sags in the tubing. Condensation will gather at the sag and clog the fog.
  • Make sure there are no cracks in the water reservoir on the humidifier. 100% silicon can fix the cracks.

Building a Vertical Tank

Posted in Terrarium Construction with tags , , on June 28, 2008 by joshsfrogs

Supplies:

1. Two pieces of glass or acrylic

2. 100% silicon for glass or Weld-on #16 for acrylic

3. Hinge

4. Latch

5. Pull

Procedure

Task Tips Pictures
Measure the inside rim of the tank. You want the measurement as close as possible to avoid gaps. Measure to the nearest 1/4 inch  
Buy 2 sheets of 1/4 inch thick glass from your local glass shop. One sheet will be for the bottom of the door (I use 6″ for the bottom piece) Shop around for glass. The price of glass can vary greatly from shop to shop.  
Place the tank in its desired final position and silicon where the black rim meets the tank at the bottom of the tank.    
Place the tank into it normal horizontal position, silicon the smaller piece of glass into the rim of the tank Use plenty of silicon to make sure there are no leaks.  
Then place the other sheet of glass into the frame.    
Silicon the hinge, latch, and pull in their desire locations. A 10 gallon is only 10″ wide, so use a 6″ hinge for a 10 gallon tank. I have had as big as a 20″ X 21″ door on a 12″ hinge.
Let the silicon dry for at least 48 hours.    

Troubleshooting

Problem Possible Solution(s)
Hinge/pull/latch is coming loose Silicon is not a glue, but a sealer. It is meant to be used in open air as opposed to a glue. Allow 48+ hours to dry to get the best results.
Tank will not stay shut Place a twist tie (from a loaf of bread) into the hole in the latch
Bottom piece of glass is leaking Add more silicon to the seal.

Terrarium Construction

Posted in Terrarium Construction with tags , on June 28, 2008 by joshsfrogs

There are a few considerations that need to be thought through before construction begins. The first consideration is how big you want the enclosure to be. The rule of thumb is 1 frog per 5 gallons. While all froglets can be kept in groups, some species will fight if there is another frog of the same sex in the enclosure. Larger terrariums support more microfauna, provide more space and exercise for the frogs, and are much easier to work with.

Tank

The first item you need to get is the tank. Garage sales and EBAY are great places to look for larger tanks. Once you have the tank, you need to build a lid for the tank. If you are going to be making the tank a vertical (tipping the tank on it’s side and making the tank opening the front of the tank) check out my How to make a vertical tank page.

Driftwood

The right driftwood makes the tank. Before I even picture the tank I’m going to build, I get the wood. The best wood for Poison Dart Frog Terrariums is Cypress, Burrows, or Grape Wood.

Cypress Driftwood – Smooth and holds up extremely well in very humid environments. This type of wood will even hold up as part of a water fall. It is also very light so it is easier to incorporate into the background.

Burrows (similar to Malaysian Driftwood) – This type of wood has tons of character with numerous grooves and a non-uniform color. This wood is the heaviest of the three, but can still be incorporated into the background of the terrarium.

Grape Wood – This type of wood has a lot of grooves like Kampas. This type of wood will be home to mold and fungus in your tank (don’t be surprised if you get mushrooms on this type of wood). The molds/fungus are harmless to frogs.

Terrarium Backgrounds

There are tons of options for Terrarium Backgrounds. Although you don’t NEED a background, it adds usable space to the terrarium, allows for more cover, and looks better than a tank without a background. The options for a terrarium background are:

Tree Fern Plaques – These plaques are 10″ X 10″ X 1″. They are light weight and the woven tree fern twigs provide a great environment for epiphytes to grow their roots.

Handi-Foam – Handi-foam is like Great Stuff except that it is 100 times better. It is black so it blends in better, it cures in less time, and we know it is safe for frogs. Spray the foam on the background, use a rubber glove to mold it like you want it, press in driftwood, and then cover it in coir and lightly press it in. Let it sit for 24 hours and you are all set!

Coco Fiber Square – These coco fiber squares are 12″ X 12″ X 1″, covered in latex, and come in brown or red. They are cheap, light, and long lasting (due to the latex coating). The fibers create a great place for plant roots to grow.

Drainage Layer

You will need drainage to keep your plants from drowning. Drainage is a necessary requirement for all Poison Dart Frog Terrariums. There are many options to accomplish this. All of these methods could be considered a “false bottom”.

Egg crate and PVC fittings – This is the oldest method around. Cut a piece of egg crate (the light diffusing stuff sold at hardware stores) to fit in the bottom of the tank. I have found that pruning sheers work for this. Then lift the egg crate off the bottom of the tank using PVC fittings.

Hydroton False Bottom – Poor enough balls in your tank to give you a 1″-3″ drainage layer. To figure out how much hydroton you need, use this formula:

Inches deep / height of the tank (in inches) = hydroton ratio

hydroton ratio X number of gallons = Gallons of hydroton needed

Gallons of hydroton needed X 4 = Liters of hydroton needed

To hide the sight of the false bottom, you can use black silicon and paint the bottom few inches of the tank.

Substrate

There are tons of options for a substrate. They are:

ABG Mix – The ABG mix was developed at the Atlanta Botanical Garden and is the Lexus of terrarium substrates. It is long lasting, holds moisture, and drains well. An all-around great choice.

Coir and Orchid bark – This is the simple and cheap method. Mix equal parts.

Sphagnum moss – This type of substrate holds a lot of moisture and inhibits the growth of molds. On occasion, the dried the moss will come back to life. Most of the time, however, it just gets covered in algae and appears to be alive.

Peat Brick – These blocks are a great choice. They are unlike the peat you can buy locally as they are a solid brick that can be cut to fit in your terrarium.

Terrarium Plants

Some froggers almost love the plants more than the frogs. You can go simple or you can hand-pick expensive plants. The plants become your filtration for the frog waste that will develop in the ecosystem. Live plants are a must for Dart Frog Terrariums. Josh’s Frogs offers tons of plants that do well in Dart Frog Terrariums. All our plants are selected to grow in terrariums.

Terrarium Lighting

Picking the right lighting for your terrarium can mean the difference between lousy looking plants and vibrant, colorful, and healthy plants in your terrarium. Your lighting options are many. Here is a quick rundown.

T-12 – These are your standard fluorescent lighting fixtures. These lights will provide enough light for most easy plants, but will not allow your bromeliads to color up and your other plants to bloom. It works, but isn’t a good choice for a display tank.

T-8 – These fluorescent bulbs have a 80 lumens per watt. They are more efficient and produce more light than T-12s. A good investment if you are doing a rack of tanks as it not only produces more light to help your plants, but it costs less to run.

T-5 – These are the best terrarium lights available. They are bright, create less heat than the CFs, and put out 90 lumens per watt. Their small size produces tons of light with little energy use. These lights are efficient enough to be used in racks and bright enough to be the top choice for display terrariums.

Once you choose the Lights you would like, your next choice is picking the right frogs!